You have heard so much about the efficacy of Home Network, otherwise called Wi-Fi. As an Internet-savvy individual, you reckon that installing the network in your home would go a long way to bolster easy connections to the web.
We assume that you have already bought a router because that is the most important item in the Wi-Fi setup. If you are not sure of the one to go for, start by defining your needs. A Wi-Fi router is one of the best networking routers, thanks to the Wi-Fi 6 access points that handle light to moderate networking needs.
Wi-Fi mesh system and Wi-Fi 5 access point are also some of the options you may want to consider when choosing a wireless networking system.
How to Configure Your Wi-Fi Networks
Here are the step-by-step processes of setting up your wireless networks for instant connection of peripheral devices, such as smartphones, tablets, and computers:
- Buy Reliable Wireless Router
Since you need a wireless router for home use, it is imperative to buy a reliable one. You can purchase Sil Micro, where you have the option of choosing from many wireless networks.
- It is Time to Connect the Cables
You can now connect the cables of your wireless router because that helps in excellent signal transmission via the Unifi wireless access point.
The wireless router usually comes with a short Ethernet cable, which serves as the primary means of connecting it to your existing Internet modem.
After connecting the Ethernet cable in the router to the Internet modem, proceed to connect the power router.
You have to wait for at least a minute to be sure that the lights on the router are turning on. If they are not, consider redoing the process until the lights come on because that indicates that the router has been connected to the Internet modem.
- Start Configuring the Wireless Router
The router cannot work until the wireless access point is configured, as that is the primary means of connecting to the Internet.
The major connections or configurations you are to make here are to configure the username and the password. You can find this information in the manual that is included in the box.
The first step is to write out the default IP address of the address from the instructions on the manual. Enter this address into the address bar and hit the enter button once it is done.
Step number two is to sign in to the router. You can find the information for this on the manual where you got the address. Enter the correct sign-in details and wait for confirmation.
The page will load and provide a column for you to enter a unique network name that serves as the name that the router would be known with.
Now, you need to configure the password, because this helps to strengthen the network. Navigate to the Password section and choose the type of encryption you would want to use to protect the router’s network. Many wireless networking router users often go for the WPA2 encryption method and create a password to solidify the security.
- Connect Your Device and Test-Run
The steps we outlined earlier are the most important procedures to follow. If you followed them to now, there is no doubt that your wireless router should be up and running.
Now, turn on the Hotspot of your device to search for the available networks. Scroll through the list of available Wi-Fi networks until you locate the unique network name you used to set up your router.
Click on that network name and enter the password you just created. Wait for it to connect and you are now connected to your home network.
Try surfing the web or logging into Facebook (or any other online-based platform) to see if the connection is working, as expected.
Configuring your Wi-Fi or home network is as easy as the four steps we outlined. Follow them to the latter and your home network should be set up in a few minutes.